Published Book/Thesis
B2. Jain, S. K., Brzev, S., Bhargava, L. K., Basu, D., Ghosh, I., and Ghaisas, V. K. (2015). “Confined masonry: for residential construction.” Gandhinagar, IN: Indian Institute of Technology, Gandhinagar, 2015, ISBN: 978-93-5258-078-1
B1. Basu, D., Whittaker, A. S. and Constantinou, M. C. (2012). “Characterizing the rotational components of earthquake ground motion.” MCEER-12-0005, Multidisciplinary Center for Earthquake Engineering Research, SUNY,Buffalo, NY.
PDF
Published Book Chapters
BC5. Sriwastav, R.K. and Basu, D., 2023. Simplified Damping Modification Factor for Vertical Response Spectra. In Symposium in Earthquake Engineering (pp. 655-667). Singapore: Springer Nature Singapore.
BC4. Gurjar, N. and Basu, D., 2023. Exploring an Alternate Perspective of the Importance Factor for Seismic Design of Structures. In Symposium in Earthquake Engineering (pp. 639-653). Singapore: Springer Nature Singapore.
BC3. Rodda, G.K. and Basu, D. (2019). “Coherency model for dense seismic array.” Recent Advances in Structural Engineering, Volume 1, Springer, Select Proceedings of Structural Engineering Convention (SEC)-2016
BC2. Basu, D. (2007). Dynamic response of structures and response spectrum. Analysis and Design of Structures for Wind and Seismic Loads. Chennai, India, Allied Publishers Pvt. Ltd. (India): 25-47.
BC1. Basu, D. (2005). Pushover analysis for structural assessment. Capacity Building of Engineers in Earthquake risk Management. Chennai, India, Allied Publishers Pvt. Ltd. (India). 1: 3.109-103.135.
Refereed Journal Publications
2023
JP55. Vats, F. and Basu, D., Alternate method to develop ground motion prediction equations: Calibration over Himalayan region. Soil Dyn. Earthq. Eng., 2024, 176, 108312.
PDF
JP54. Vats, F., Basu, D. Alternate algorithm for characterization of strong velocity pulse in ground motions. Int J Adv Eng Sci Appl Math (2023). https://doi.org/10.1007/s12572-023-00355-2
PDF
JP53. Sharma, S., & Basu, D. Influence of supplementary cementitious materials (SCMs) on transport properties of concrete and interfacial transition zone (ITZ): a review. (2023).
doi: 10.18520/cs/v124/i11/1263-1269
PDF
JP52. Sriwastav, R.K., Basu, D. Selection and scaling of 3-component ground motion suite for scenario- and intensity-based assessment of buildings and structures. Bull Earthquake Eng (2023). https://doi.org/10.1007/s10518-023-01623-z
PDF
JP51. Vats, F., Basu, D. On the construction of Joyner-Boore distance (Rjb) for PESMOS and COSMOS databases. J Seismol (2023). https://doi.org/10.1007/s10950-022-10129-1
PDF
2022
JP50. Manawa, K., Basu, D. Non-parametric and parametric damage indices through a case-study of a reinforced concrete bridge pier, Structure and Infrastructure Engineering, DOI:10.1080/15732479.2022.2150781
PDF
JP49. Mushtaq, S. M., Rajput, T., Basu, D. (2022). “Cement-superplasticizer compatibility and flow properties of binder paste and mortar using marsh cone and flow table method”, The Indian Concrete Journal, Vol. 96, No. 9, pp. 20-33.
PDF
JP48. Gurjar, N., Basu, D. Epistemic Uncertainty in PSHA and Seismic Hazard Characterization Using the Logic Tree Approach: Part II, Implementation over North-East India. Pure Appl. Geophys. (2022). https://doi.org/10.1007/s00024-022-03148-z
PDF
JP47. Gurjar, N., Basu, D. Epistemic Uncertainty in PSHA and Seismic Hazard Characterization Using the Logic Tree Approach: Part I, Developing the Framework. Pure Appl. Geophys.(2022). https://doi.org/10.1007/s00024-022-03143-4
PDF
JP46. Gurjar, N., Basu, D. On the declustering methods of seismic catalogue — an application over Indian subcontinent. J Seismol (2022). https://doi.org/10.1007/s10950-022-10105-9
PDF
JP45. Sharma, S., Gurjar, N., Menon, A., Sriwastav, R. K., and Basu, D. (2022). “Developing axial force bending moment interaction charts for the seismic design of RC slender shear walls with boundary elements”, The Indian Concrete Journal, Vol. 96, No. 5, pp. 29-58.
PDF
JP44. Basu D, and Lakhani M. Bond slip in reinforced concrete beam-column joints-a semi-empirical implicit modeling and possible influence of design standard compliance.
PDF
JP43. Kolli MK, Basu D, Prashant A. Simplified 1D elastic modeling of duo-pile foundation system incorporating the Interaction mechanisms prevailing under lateral loads. Journal of Bridge Engineering. 2022 Apr 1;27(4):04022014.
PDF
JP42. Sriwastav, RK. and Basu, D. (2022). “Characterisation of design spectra for vertical ground motion.” International Journal of Earthquake and Impact Engineering.
PDF
JP41. Basu D, Vats F, Panchal A. Multicomponent directional-cum-modal combination rule for seismic analysis: theory and illustrations. Earthquake Engng Struct Dyn. 2022;1–27.
PDF
JP40. Sriwastav R.K. and Basu, D., 2022, Vertical spectra consistent with horizontal seismic hazard, Soil Dynamics and Earthquake Engineering, Vol 157, Pg 1-26.
PDF
JP39. Basu, D. and Lakhani, M., 2022. Implicit framework for developing design recommendations on shear strength of RC beam-column joints. Journal of Building Engineering, 47, p.103877.
PDF
2021
JP38. Rodda, G.K., Gurjar, N. and Basu, D., 2021. Phase-structure in conditional simulation of spatially varying ground motion and possible influence on structural demand. Journal of Earthquake and Tsunami, p.2250003.
PDF
JP37. Chakra-Varthy, P. and Basu, D. (2021). ” Natural Period and Vertical Distribution of Base Shear in Confined Masonry Buildings using Ambient Vibration Test,” Bulletin of Earthquake Engineering.
PDF
JP36. Vats, F., & Basu, D. (2021). A computationally efficient framework for rotation dependent and rotation independent intensity measures. Earthquake Engineering & Structural Dynamics, 50(6), 1562-1575.
PDF
2020
JP35. Rodda, G.K. and Basu, D. (2020). “A novel framework for conditional simulation of fully nonstationary spatially varying ground motion field.” Earthquake Engineering and Structural Dynamics.
PDF
JP34. Verma, R. and Basu, D., 2020. On correlating the modulus of elasticity of stack-bonded flyash brick masonry using impact hammer and compression tests. European Journal of Environmental and Civil Engineering, 24(4), pp.539-567.
PDF
JP33. Rodda, G.K. and Basu, D. (2020). “Spatially correlated vertical ground motion for seismic design.” Engineering Structures, Elsevier. Vol. 206.
PDF
2019
JP32. Basu, D. (2019). “Back-of-the-Envelope analysis of plan-asymmetric confined masonry buildings for force-based seismic design.” Journal of Building Engineering, Elsevier. Vol. 21: 455–467.
PDF
JP31. Rodda, G.K. and Basu, D. (2019). “Parameterisation of Auto-Spectral Density of Earthquake Induced Strong Ground Motions.” Soil Dynamics and Earthquake Engineering, Elsevier. Vol. 118: 52–64.
PDF
JP30. Rodda, G.K. and Basu, D. (2019) “On conditional simulation of spatially varying rotational ground motion” Journal of Earthquake Engineering, Taylor and Francis.
PDF
JP29. Nema, H. and Basu, D. (2019). “Natural Properties of Confined Masonry Buildings– Experimental Case Studies and Possible Inference” International Journal of Masonry Research and Innovation, Inderscience, UK. Vol. 4(3): 197–226.
PDF
2018
JP28. Rodda, G.K. and Basu, D. (2018) “Spatial Variation and Conditional Simulation of Seismic Ground Motion.” Bulletin of Earthquake Engineering. Vol. 161(10): 4399–4426.
PDF
JP27. Bashir, A. and Basu, D. (2018). “Revisiting Probabilistic Seismic Hazard Analysis of Gujarat: An Assessment of Indian Design Spectra.” Natural Hazards, Vol. 91(3): 1127–1164.
PDF
JP26. Rodda, G.K. and Basu, D. (2018). “Coherency model for translational and rotational ground motions.” Bulletin of Earthquake Engineering, Springer, Volume 16, Issue 7, pp 2687–2710.
PDF
JP25. Rodda, G.K. and Basu, D. (2018). “Apparent translational component for rotational ground motions.” Bulletin of Earthquake Engineering, Vol. 16(1): 67–89.
PDF
2017
JP24. Basu, D., Constantinou, M. C. and Whittaker, A. S. (2017). “Discussion on “Array-derived rotational seismic motions: revisited”.” Bulletin of Earthquake Engineering, Vol. 15 (12): 5605-5615.
PDF
JP23. Ghaisas, K.V., Basu, D., Brzev, S. and Pérez Gavilán, J.J. (2017). “Strut-and-Tie Model for Seismic Design of Confined Masonry Buildings.” Construction and Building Materials, Vol. 147: 677-700.
PDF
JP22. Basu, D., Whittaker, A. S. and Constantinou, M. C. (2017). “On the design of a dense array to extract rotational components of earthquake ground motion.” Bulletin of Earthquake Engineering, Vol 15 (3): 827-860.
PDF
JP21. Rodda, G.K. and Basu, D. (2017). “On extracting rotational components of ground motion using an empirical rotational window.” International Journal of Earthquake and Impact Engineering, Vol. 1 (3): 253-288.
PDF
2016
JP20. Basu, D. and Kota, T. (2016). “Estimating Peak Dynamic Response from Pushover Type Analysis using a Semi-Empirical Method.” Bulletin of Earthquake Engineering, Vol. 14 (12): 3409–3440.
PDF
JP19. Basu, D. and Reddy, P.R.M. (2016). “A New Metallic Damper for Seismic Resilience: Analytical Feasibility Study.” Structures, 7: 165-183.
PDF
2015
JP18. Basu, D. and Giri, S. (2015). “Accidental eccentricity in multistory buildings due to torsional ground motion.” Bulletin of Earthquake Engineering, Vol. 13 (12): 3779-3808.
PDF
JP17. Basu, D. and Whittaker, A. S. (2015). “Efficient Generation of Statistically Consistent Demand Vectors for Seismic Performance Assessment”, Journal ING-IABSE, Special Issue on Earthquake Engineering, March-2015.
PDF
JP16. Basu, D., Whittaker, A. S. and Constantinou, M. C. (2015). “Characterizing rotational components of earthquake ground motion using a surface distribution method and response of sample structures.” Engineering Structures, Vol. 99: 685-707.
PDF
2014
JP15. Basu, D., Constantinou, M. C. and Whittaker, A. S. (2014). “An equivalent accidental eccentricity to account for the effects of torsional ground motion on structures.” Engineering Structures, Vol. 69: 1-11.
PDF
2013
JP14. Basu, D., Whittaker, A. S. and Constantinou, M. C. (2013). “Extracting rotational components of earthquake ground motion using data recorded at multiple stations.” Earthquake Engineering and Structural Dynamics, Vol. 42 (3): 451-468.
PDF
2012
JP13. Basu, D., Whittaker, A. S. and Constantinou, M. C. (2012). “On estimating rotational components of ground motion using data recorded at a single station.” Journal of Engineering Mechanics, ASCE, 138 (9): 1141-1156.
PDF
2011
JP12. Balasubramanian, S. R., Rao, K. B., Basu, D., Anoop, M. B. and Vaidyanathan, C. V. (2011). “An improved method for estimation of elastic lateral stiffness of brick masonry shear walls with openings.” Journal of Civil Engineering, KSCE, 15(2): 281-293.
PDF
2009
JP11. Basu, D. (2009). “Dynamics of a class of horizontal setback buildings with flexible floor diaphragm.” Journal of Structural Engineering, ASCE, 135: 873-877.
PDF
2008
JP10. Lakshmanan, N., Raghuprasad, B. K., Muthumani, K., Gopalakrishnan, N. and Basu, D. (2008). “Identification of reinforced concrete beam-like structures subjected to distributed damage from experimental static measurements.” Computers and Concrete, 5(1): 37-60.
PDF
JP9. Lakshmanan, N., Raghuprasad, B. K., Muthumani, K., Gopalakrishnan, N. and Basu, D.(2008). “Damage evaluation through radial basis function network based artificial neural network scheme.” Smart Structures and Systems, 4(1): 99-102.
PDF
JP8. Basu, D. and Gopalakrishnan, N. (2008). “Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks.” Enginnering Structures, 30: 1272- 1291.
PDF
JP7. Basu, D. (2008). “From third to fourth order variant of newton’s method for simple roots.” Applied Mathematics and Computations, 202: 886-892.
PDF
JP6. Basu, D. (2008). “Family of cubically convergent scheme using inverse newton function for multiple roots.” International Journal for Computational Methods in Engineering Science & Mechanics, 9: 189–200.
PDF
JP5. Basu, D. (2008). “Composite fourth order newton type method for simple root.” International Journal for Computational Methods in Engineering Science & Mechanics, 9: 201-210.
PDF
2007
JP4. Basu, D. and Jain, S. K. (2007). “Alternative method to locate center of rigidity in asymmetric buildings.” Earthquake Engineering and Structural Dynamics, 36: 965-973.
PDF
2006
JP3. Lakshmanan, N., Raghuprasad, B. K., Muthumani, K., Gopalakrishnan, N. and Basu, D. (2006). “Wavelet analysis and enhanced damage indicators.” Smart Structures and Systems, 3(1): 23-49.
PDF
2005
JP2. Basu, D. (2005). “Proportionate dynamically non-separable buildings: a class of buildings with horizontal setback.” International Journal of Structural Stability and Dynamics, 5(1): 95-112.
PDF
2004
JP1. Basu, D. and Jain, S. K. (2004). “Seismic analysis of asymmetric buildings with flexible floor diaphragm.” Journal of Structural Engineering, ASCE, 130: 1169-1176. Journal Papers In
PDF
Invited Papers/Abstracts in Published Conference Proceedings
CI2. Basu, D. and Reddy, P. R. (2015). “Design of a New Passive Energy Dissipation System”, 5th Tongji-UBC Symposium on Earthquake Engineering, May 4-8, 2015 Tongji University Shanghai, China.
CI1. Rodda, G. R. and Basu, D. (2015). “Development of a Window Based Approach for Simplified Estimation of Rotational Ground Motion”, 5th Tongji-UBC Symposium on Earthquake Engineering, May 4-8, 2015 Tongji University Shanghai, China.
Contributed (Non-Invited) Papers/Abstracts in Published Conference Proceedings
CNI8. Rodda, G.K. and Basu, D. (2016). “Coherency model for dense seismic array.” Structural Engineering Convention, SERC, Chennai.
PDF
CNI7. Jain, S.K., Brzev, S, Basu, D., Rai, D.C. and Mitra, K. “Confined masonry construction for improved seismic safety of buildings in India”, in the International Seminar on Emerging Building Materials and Construction Technologies, India Habitat Centre, New Delhi, IN, 2016.
CNI6. Jain SK, Basu D, Ghosh I, Rai DC, Brzev S, and Bhargava LK. Application of Confined Masonry in a Major Project in India. Proceedings of the 10th National Conference in Earthquake Engineering, Earthquake Engineering Research Institute, Anchorage, AK, 2014.
PDF
CNI5. Basu, D., Constantinou, M. C. and Whittaker, A. S. (2011). “Including accidental torsion in response-history analysis of safety-related nuclear structures.” Transactions, SMiRT21, New Delhi, India, Div-VI: Paper ID# 279.
PDF
CNI4. Basu, D. and Rao, K. B. (2008). “Reliability Analysis of Steel Frame Structures, Located in Coastal Region of India.” ICONQR08, Indian Statistical Institute, Calcutta, (in CD).
CNI3. Balasubramanian, S. R., Basu, D., Anoop, M. B. and Rao, K. B. (2008). “Stiffness of brick masonry shear walls with openings-parametric study and probabilistic analysis.” Proc. of National Conference on Recent Advances in Structural Engineering, Anantapur, Andra Pradesh, India, 177-186.
CNI2. Basu, D., Gopalakrishnan, N., Muthumani, K. and Lakshmanan, N. (2005). “Concept of floor isolation in reducing seismic demand.” Proc. International Conference on Advances in Concrete Composites and Structures, SERC, Chennai, India, 1057-1064.
CNI1. Lakshmanan, N., Muthumani, K., Basu, D., Sreekala, R. and Gopalakrisnan, N. (2002). “Design for seismic base isolation.” Proc. of 12th Symposium on Earthquake Engineering, Roorkee, India.
